Panduit The FiberRunnerÂ® 6x4 End Cap Fitting is used for closing off open ends of the channel or fittings. The end caps assist in creating a structure that protects fiber optic and high-performance copper data cabling from physical damage.

Réf.: FREC6X4LYL

13,94€

Pas en stock
Panduit The FiberRunnerÂ® 6x4 Horizontal Tee creates a 90Â° horizontal branch from straight horizontal runs. The horizontal tee provides versatility due to multiple spillout options that include spill-over fittings and the vertical tee which accepts a three-sided

Réf.: FRT6X4LYL

137,85€

Pas en stock
Panduit The FiberRunnerÂ® 6x4 QuikLockâ„¢ Coupler quickly joins two sections of channel and/or fittings. The coupler delivers fast installations due to toolless installation.

Réf.: FRBC6X4LYL

27,58€

Pas en stock
Panduit The GEE62F-A-C Polyethylene Slotted Grommet Edging protects and prevents wires and cables from chafing against sharp edges of panel walls and knockouts. Slotted edging recommended for use on irregularly shaped and round panel holes. The material is high

Réf.: GEE62F-A-C

56,75€

Pas en stock
Panduit The GEE62F-A-C0 Polyethylene Slotted Grommet Edging protects and prevents wires and cables from chafing against sharp edges of panel walls and knockouts. Slotted edging is recommended for use on irregularly shaped and round panel holes. The material is h

Réf.: GEE62F-A-C0

65,27€

Pas en stock
Panduit The GEE99F-A-C Polyethylene Slotted Grommet Edging protects and prevents wires and cables from chafing against sharp edges of panel walls and knockouts. Slotted edging recommended for use on irregularly shaped and round panel holes. The material is high

Réf.: GEE99F-A-C

61,99€

Pas en stock
Panduit The H3X4LG6 PVC Hinged-Cover Wide Slot Wiring Duct features a hinged cover and wide finger/slot design that provides greater rigidity and allows for use with a range of wire/bundle sizes. Upper and lower scorelines allow for easy finger/sidewall section r

Réf.: H3X4LG6

10,83€

Pas en stock
Panduit The HC3LG6 PVC Hinged Wiring Duct Cover features a dual-sided hinged cover that opens up to 100Â° from either sidewall of the duct. Designed with the user in mind, the cover is easy to install and remove. The general-purpose lead-free PVC material is suit

Réf.: HC3LG6

2,61€

Pas en stock
Panduit The HTCT250-2-1 Compression Connector Tap Used to tap into continuous conductors as a splice or pig tailing. Each HTAP terminates a wide range of conductor sizes and combinations of code and flex conductors Class G, H, I, and Diesel Locomotive to suit a v

Réf.: HTCT250-2-1

19,79€

Pas en stock
Panduit The LCC10-14AW-L Tin-Plated Copper Compression Connector Lug, two-hole, long barrel, has color-coded barrels marked with Panduit and specified competitor die index numbers for proper crimp die selection. The long barrel maximizes the number of crimps and

Réf.: LCC10-14AW-L

780,51€

Pas en stock
Panduit The LCD10-14A-L Tin-Plated Copper Compression Connector Lug, two-hole, standard barrel, has color-coded barrels marked with Panduit and specified competitor die index numbers for proper crimp die selection. The long barrel maximizes the number of crimps a

Réf.: LCD10-14A-L

750,44€

Pas en stock
Panduit The LCD4-14A-L Copper Compression Connector Lug, two-hole, standard barrel, has color-coded barrels marked with Panduit and specified competitor die index numbers for proper crimp die selection. An inspection window aids to visually assure full conductor

Réf.: LCD4-14A-L

532,89€

Pas en stock
Panduit The LCD6-14A-L Tin-Plated Copper Compression Connector Lug, two-hole, standard barrel, has color-coded barrels marked with Panduit and specified competitor die index numbers for proper crimp die selection. An inspection window aids to visually assure full

Réf.: LCD6-14A-L

482,07€

Pas en stock
Panduit The LCD8-14A-L Tin-Plated Copper Compression Connector Lug, two-hole, standard barrel, has color-coded barrels marked with Panduit and specified competitor die index numbers for proper crimp die selection. An inspection window aids to visually assure full

Réf.: LCD8-14A-L

376,19€

Pas en stock
Panduit The LCDX6-14A-L Tin-Plated Copper Compression Connector Lug, two-hole, standard barrel, has color-coded barrels marked with Panduit and specified competitor die index numbers for proper crimp die selection. The generously beveled wire entry prevents bent

Réf.: LCDX6-14A-L

484,56€

Pas en stock
Panduit The MLT1S-CP self-locking cable tie speeds up installation with a unique self-locking head design that locks into place at any part of the tie body. The smooth surfaces and rounded edges assure cable protection and worker safety while providing a strong,

Réf.: MLT1S-CP

501,64€

Pas en stock
Panduit The MLT2S-CP self-locking cable tie speeds up installation with a unique self-locking head design that locks into place at any part of the tie body. The smooth surfaces and rounded edges assure cable protection and worker safety while providing a strong,

Réf.: MLT2S-CP

627,05€

Pas en stock
Panduit The MLT4DEH15-Q316 self-locking cable cleat speeds up installation with a unique self-locking head that secures into any position along the band's length. The smooth and safe cable banding passes through the head twice, providing additional strength in sh

Réf.: MLT4DEH15-Q316

5 617,86€

Pas en stock
Panduit The MLT4DSH-Q316 self-locking cable cleat speeds up installation with a unique self-locking head that secures into any position along the band's length. The smooth and safe cable banding passes through the head twice, providing additional strength in shor

Réf.: MLT4DSH-Q316

7 303,31€

Pas en stock
Panduit The MLT4H-LP self-locking cable tie speeds up installation with a unique self-locking head design that locks into place at any part of the tie body. The smooth surfaces and rounded edges assure cable protection and worker safety while providing a strong,

Réf.: MLT4H-LP

940,56€

Pas en stock
Panduit The MLT4S-CP self-locking cable tie speeds up installation with a unique self-locking head design that locks into place at any part of the tie body. The smooth surfaces and rounded edges assure cable protection and worker safety while providing a strong,

Réf.: MLT4S-CP

783,80€

Pas en stock
Panduit The MLT4S-CP316 self locking cable tie speeds up installation with a unique self-locking head design that locks into place at any part of the tie body. The smooth surfaces and rounded edges assure cable protection and worker safety while providing a stron

Réf.: MLT4S-CP316

979,75€

Pas en stock
Panduit The MLT6H-LP self-locking cable tie speeds up installation with a unique self-locking head design that locks into place at any part of the tie body. The smooth surfaces and rounded edges assure cable protection and worker safety while providing a strong,

Réf.: MLT6H-LP

1 134,18€

Pas en stock
Panduit The MLTC4H-LP316 self-locking cable tie speeds up installation with a unique self-locking head design that locks into any part of the tie body. The Nylon 11 coating provides additional edge protection and prevents corrosion between dissimilar metals. The

Réf.: MLTC4H-LP316

1 704,69€

Pas en stock
Panduit The MLTFC4H-LP316 self-locking cable tie speeds up installation with a unique self-locking head design that locks into place at any part of the tie body. The 316 stainless steel is wrapped in UV-resistant, halogen-free, Polyester to promote worker safety

Réf.: MLTFC4H-LP316

1 704,69€

Pas en stock
Panduit The Open-Accessâ„¢ Horizontal D-Ring Cable Manager provides open and efficient access to power, coaxial and communications cables and switch ports. Made of a steel frame with modular plastic snap-in D-rings, the cable manager is lightweight and durable, a

Réf.: CMPHF1

40,31€

Pas en stock
Panduit The OpticomÂ® fiber tray is designed to organize fiber distribution cabling. When used with the CFAPPBL1 patch panel, it accommodates up to 4 QuickNet cassettes or FAP adapter panels. It is black powder coated steel and features 4 ports in a 1 RU footprin

Réf.: FMT1

117,06€

Pas en stock
Panduit The Panduit SGABM25-AV-C300 super grip acrylic-based adhesive backed cable tie mount is applied with very high-bond adhesive. They are made of heat stabilized and weather resistant Nylon 6.6 and are for use with miniature, intermediate, and standard cross

Réf.: SGABM25-AV-C300

134,27€

Pas en stock
Panduit The PatchLinkâ„¢ Horizontal Cable Manager provides a neat and efficient way to manage patch cables on any standard EIA 19 inch (483mm) rack or cabinet. It manages copper, fiber optic, and coax cables. Flexible fingers organize patch cords, simplifying mov

Réf.: WMPFSE

48,00€

Pas en stock
Panduit The PCSLSH-B-CR Custom Length Cushion Sleeving is designed for use with metal locking strap and buckle strap cable cleats to help protect in the event of a short circuit fault, minimizing disruption and damage to personnel and property. The cushion sleevi

Réf.: PCSLSH-B-CR

421,36€

Pas en stock

Filtres